Ready Mix concrete company

Call us today at 507.289.4022

Contractor Supply

Delivery of Contractor Supply products

Contact Jason at jason@r-mcc.com or 507-272-4239

Contract Supply thru Ready Mix offers a convenient option for you to maintain inventory of products you need every day. All products we offer can be delivered to you on the same day you order them. We offer most of your favorite tools and products right here at our store in Rochester at 4010 19th St NW. Contact Json at (507) 272-4239

  • Colored Concrete
  • Stamped Concrete
  • Acid Stains for Concrete
  • Kraft, Marshaltown and other tools
  • Shake on Color Hardeners
  • Concrete Sealers
  • Concrete Finishing aides
  • Rebar
  • Nails
  • Wall Forms and Ties
  • Most other products
 

Contractor Supply Store Decorative Concrete Concrete Placement Tools

TK Products

Finishing Aids

TK 2120 TRI - Film
An evaporation retardant to be used on freshly poured concrete to retard the evaporation of surface water during times of placing concrete in direct sunlight, high winds, high temperatures, and/or low humidity, which will prevent crusting of the surface of the concrete and aid in its finishing. TK-2120 TRI-FILM slows the evaporation by 80%.

TK- 2090 Liquid Stamp Release
A solution to be sprayed on the concrete before stamping, and it will also help keep stamping and hand tools free from concrete build up during use. It is scented with vanilla.

Cleaning and Thinning Solvents

TK - 00
A solvent for cleaning sprayers that were used for spraying a solvent-based curing and sealing compound and tools. It is also used for removing solvent-based curing and sealing compounds.

TK - 2012 KWIK - KLEAN
A biodegradable curing compound stripper and graffiti remover. Read label or Spec Data sheet before using.

Sealers

TK Achro Seal 1315
The common use for Achro Seal 1315 as a curing and sealer compound which penetrates into the slab, binding together the small dust particles, filling the voids to produce a hard dust free brighter surface. The reasons to use this product are to provide maximum hardness, resistance to abrasion and damage caused by salt, oil, grease, mild acids and alkali etc.

TK Tri_ Seal
A 100% water based, high solids, premiere acrylic resin compound formulated to cure, seal, protect and dustproof concrete as well as to seal many types of porous tile and resilient floor. TRI-SEAL is designed for both interior and exterior application; however, it is particularly recommended for indoor work in public buildings and housing (hospitals, schools, restaurants and private residences where solvent systems are difficult to use.)

TK Bright Kure & Seal
A blend of 100% methyl methacrylate polymers used as a superior, exposed aggregate cure, and final sealer and protective coating. Bright Seal is an excellent sealer for architectural concrete, terrazzo, brick, stone, slate, quarry tile, burnish block, or any cementitious material where yellowing or discoloration cannot be allowed. The coating is clear and does not yellow, nor degrade, with age or exposure to ultraviolet rays.

TK Tri Siloxane
A solvent-based, low viscosity oligomeric organosiloxane, one-component, deep-penetrating, invisible, non-darkening water repellent for concrete and masonry. The siloxane groups are chemically bonded, not just physically bonded like other surface penetrating sealers, to the concrete. It eliminates the ever-present moisture that had previously engulfed the cementitious substrate, thus eliminating spalling, freeze/thaw damage, and rebar corrosion. It penetrates up to 1/4 inch and becomes a permanent part of the substrate, not allowing water to enter, but allows moisture vapor to pass out of the substrate.

TK_290 WB
A water-based, low viscosity oligomeric organosiloxane, one-component, deep penetrating, invisible, non-darkening water repellent for concrete and masonry. The siloxane groups are chemically bonded, not just physically bonded like other surface penetrating sealers, to the concrete. It eliminates the ever present moisture that had previously engulfed the cementitious substrate, thus eliminating spalling, freeze/thaw damage, and rebar corrosion. It penetrates up to 1/4 inch and becomes a permanent part of the substrate not allowing water to enter, but allows moisture vapor to pass out of the substrate.

TK Epoxy and Polyurethane Coatings

 

Concrete Surface Retarders

TK-6000 Concrete Surface Retarder
Applied to the surface of freshly placed concrete, and it will chemically delay the set of the surface mortar. After 8 - 16 hours, the surface mortar can be washed off, exposing the surface aggregate.

Form Release Agents

TK- 709 OTC Ultra Release
A high-performance, low-odor form release agent that provides a means of easy release between all types of forms and concrete by the interaction of fatty acids, and with the use of a clear EPA-approved oil and other slippery agents instead of fuel oil, guarantees us non-staining of all architectural concrete. Rust inhibitors and wood preservatives are blended into the formulation to prevent rust on metal forms and deterioration of wooden forms.

Linseed Oil Based

TK-L368 Clear Emulsion Linseed Oil
A Curing, sealing , and protective coating for fresh concrete surfaces. TK- L 368 is formulated to meet State highway Department Requirments. TK-L368 meets ASTM C-309 Type I, Class B, and AASHTO M-148 Type 1, Class B.

TK - L368 White
White pigment for exterior work.
Coverage Rate: Curing and Sealing 200 Sq. Ft./Gal.

TK-L368 WHITE
meets ASTM C-309 Type II, and AASHTO M-148 Type II.

Concrete bonding Agents / Mixtures

TK-225 Bonding Agent
An acrylic latex liquid bonding agent and an admix (in place of water) for cement mortar patching and resurfacing. Mixed with a cement/sand or gravel combination, it becomes an effective patching and topping mortar having excellent adhesion capabilities and resistance to abrasion, freeze/thaw cycling, industrial chemicals and deicing salts and chemicals.

TRI - Bond
A liquid, ready-to-use, high build, re-emulsifiable bonding agent used for adhering gypsum plaster and portland cement mixtures to all types of structurally sound surfaces (wallboard, fiberboard, wood, metal, glass, tile, concrete masonry, or marble) for bonding mortar bed of ceramic tile to old walls and floors. For bonding terrazzo and stucco.

Liquid Stamp Release

TK-2090 Liquid Stamp Release
A solution to be sprayed on the concrete before stamping, and it will also help keep stamping and hand tools free from concrete build up during use. It is scented with vanilla.

Joint and Crack Fill

TK-9030 Crack and Joint Repair
A low viscosity translucent gray polyurethane/polyurea hybrid that comes in a 600 ML two component kit or bulk. It has a fast cure to allow for quick reopening of area. It has excellent adhesion, is very tough. Its low viscosity allows it to penetrate deep into smaller 1/32" hairline cracks.

W. R. Meadows

MEADOW PATCH T1 (Thin Patch Repair Mortar)
A one-component, polymer-modified, cementitious repair mortar designed for horizontal, vertical, and overhead applications. This all-purpose mortar is designed for maintenance patching and minor repairs 1" to featheredge.

MELROE - waterproofing system is a flexible, versatile, dependable, roll-type waterproofing membrane. It is composed of a nominally 56 mil thick layer of polymeric waterproofing membrane on a heavy duty, four-mil thick, cross-laminated polyethylene carrier film. The two components are laminated together under strict quality-controlled production procedures.

Reinforcement Products

Rebar
Ready Mix-Contrator Supply is your one stop supplier for your rebar needs. Common sizes in inventory are #2(1/4") pencil rod, #3 (3/8") , #4(1/2"), #5(5/8"), #6(3/4"). Call Ph.507-272-4239 or Ph. 507-289-4022 for special orders. Prices on rebar change daily, call for pricing.

Wire Mesh
Rolls available: Size 5'X150'

Wire Mesh Mats 6"X6"X10'X10'
available: Size 8'X15'

Reinforcing Fiber

Fiber 150 - Poly Mesh (Monofilament) will control shrinkage and thermal cracking, will not rust or corrode, will assist in preventing cracks, reduces permeability to chloride and increases impact resistance, and is chemically inert and non-hazardous / non-reactive.

Fiber 300 - Poly Mesh (Fibrillated Fiber Reinforcement System for Concrete) will Control Shrinkage and thermal cracking, will not rust or corrode, will assist in preventing cracks, reduces permeability to chloride and increases impact resistance, and is chemically inert and non-hazardous / non-reactive.

Advantage Structural Fiber

Helix Fiber0279 In any application, from structural foundations, to slabs, suspended structural concrete, and paving, Helix will increase the strength and durability of concrete.